芯片解密是耐斯迪在 研究中成功破解的典型芯片型号,针对该芯片,我们解密周 期短、价格低、可靠性强。这里,我们将针对C8051F711 IC解密的主要技术特征做简单介绍,这里我们仅提供对C8051F711 芯片的主要 功能特征介绍,供客户及各类单片机解密工程师与电子工程师参考借鉴,有 IC解密 需求者请直接与我们联系咨询。
下面是关于C8051F711 芯片的主要性能特征介绍,我们提供给广大客户及其他各类技术工程师参考借鉴。
C8051F711单片机主要功能特征分析:
 High-Speed 8051 μC Core
  - Pipelined instruction architecture; executes 70% of instructions in 1 or 2
  system clocks
  - Up to 25 MIPS throughput with 25 MHz system clock
  Memory
  - 8 kB Flash; in-application programmable in 512-byte sectors
  - 32 bytes Data EEPROM with 100,000 cycle read/write endurance
  (‘F708 and ‘F709)
  - 512 bytes data RAM
  - External parallel data memory interface
  Analog Peripherals
  10-Bit Analog to Digital Converter (‘F708 and ‘F710)
  - Up to 500 ksps
  - 16 external inputs
  - On-chip voltage reference (may use VDD or external voltage)
  - Built-in temperature sensor
  - External conversion start input option
  Comparator
  - Programmable hysteresis and response time
  - Configurable as interrupt or reset source
  Capacitive Touch Sense
  - 16-bit capacitance-to-Digital Converter
  - Superior Noise Immunity and fast 40us aquisition time
  - Up to 32 external inputs
  - Auto-scan and compare
  - Auto-accumulate 4x, 8x, and 16x samples
  Digital Peripherals
  Up to 54 Port I/O with high sink current
  - Flexible configuration using digital crossbar
  - Many can be configured for analog or digital function
  - Every pin can be optimized for its best use
  Serial Communications
  - HW enhanced UART
  - SMBusTM (I2C compatible)
  - Enhanced SPITM
  User Programmable Timing Functions
  - Four general purpose 16-bit counter/timers
  - 16-bit programmable counter array (PCA) with three capture/compare
  modules and enhanced PWM capability
  - Real-time clock mode using enhanced timer and crystal
  Clock Sources
  - Calibrated Internal programmable oscillator
  ?芯片解密单片机破解 Calibrated to 2% accuracy over temp and Vdd
  ? 24.5 MHz to allow max speed CPU operation
  ? Supports crystal-less UART operation
  - External oscillator: Crystal, RC, C, or Clock
  - Can switch between clock sources on-the-fly
  Supply Voltage: 1.8 to 3.3 V
  - Built-in voltage supply monitor
  Temperature Range: –40 to +85 °C